|
Klark Teknik 1974년 Phil, Terry Clarke 형제가 Klark Teknik사를 설립하여 앞선 기술개발을 통해 혁신적인 오디오 디자인을 소개한 이래로, 오늘날까지도 아날로그 및 디지털 영역 오디오 프로세싱 분야에 혁신적인 디자인과 엔지니어링을 통해 뛰어난 음질의 제품을 생산하고 있습니다. Klark Teknik사의 DN시리즈 그래픽 이퀄라이저는 아직도 음향시장의 독보적인 존재로 자리하고 있습니다.
SQ-1S The analogue audio splitter remains the most versatile and cost effective way of distributing audio signals to multiple locations, especially in a world where digital and analogue consoles are paired in Front of House and monitor configurations, and digital consoles employ different audio transport protocols.
The Square ONE Splitter provides a simple solution with a user-friendly, high-performance, MIDAS XL8 inspired pre-amp design, packaged in a 2U, eight channel format.
* MIDAS XL8-inspired mic preamps
* 9-position rotary gain switch per input
* 30Hz Hi-pass filter with switch and status LED per input
* Inputs duplicated on front and rear panels
* Transformer-isolated gain-independent outputs
* Front-panel and remote 48V switching with status LED per input
* Solo buss with integral headphone amp and level control
* 1:16 media split function with front and rear panel status indication
* Separate ground lift switch with LED status indicators for each set of rear panel outputs
* Individual 4-Segment LED output metering for each input
* Roadworthy (2U) all-steel chassis
* Universal power supply
| Technical Specifications |
|
| Inputs |
8 (mic/line) |
| Type |
Analogue, electronically balanced, female XLRs (Pin 2 hot) |
| Maximum input level |
+22dBu |
| Input impedance |
5k ohms |
| Common mode rejection |
-80dB at 1kHz (typical), unity gain (0dB) |
| ratio (CMRR) |
-100dB at 1kHz (typical), maximum gain (+40dB) |
|
|
| Outputs |
16 (rear panel) |
| Type |
Analogue, electronically balanced, male XLRs (Pin 2 hot) |
| Operating level |
0dB |
| Maximum level |
+22dBu |
| Output impedance |
<50 ohms |
| Signal drive capacity |
<600 ohms |
|
8 (front panel) |
| Type |
Analogue, transformer isolated balanced, male XLRs (Pin 2 hot) |
| Operating level |
-6dB |
| Maximum level |
+22dBu |
| Output impedance |
<75 ohms |
| Signal drive capacity |
<600 ohms |
|
|
| Headphone output |
1 |
| Type |
Analogue, TRS jack socket |
| Rating |
750mW (nominal 50 ohm load) |
|
|
| Terminations |
|
|
|
| Audio |
Front panel connectors |
| Channel input |
eight x AA series female XLRs (labelled "IN 1" to "IN 8") |
| Isolated output C |
eight x AA series male XLRs (labelled "TX OUT 1" to "TX OUT 8") |
| Headphone output |
one 1/4" TRS balanced jack socket
Rear panel connectors |
| Channel input |
eight x AA series female XLRs (labelled "IN 1" to "IN 8") |
| Electronic output A |
eight x AA series male XLRs (labelled "OUT A") |
| Electronic output B |
eight x AA series male XLRs (labelled "OUT B") |
|
|
| Power |
3-pin IEC |
|
|
| Performance |
|
| Frequency response1 |
±0.5dB (input to output), 20Hz to 20kHz |
| Distortion |
<0.02% @ 1kHz, 0dBu at unity gain |
| Dynamic range2 |
Electronically balanced outputs: >122dB* Transformer isolated outputs: >140dB*
|
| Noise floor3 |
Unity gain <-100dBu*
Mic EIN @ +40dB gain <-128dBu* |
|
|
| High pass filter |
|
| lter frequency |
-3dB @ 30Hz |
| Filter slope |
12dB per octave |
|
|
| Power Requirements |
|
| Voltage |
100VAC to 240VAC ±10% |
| Frequency |
50Hz to 60Hz |
| Consumption |
<35W |
|
|
| Dimensions |
|
| Height |
88 mm (3.5"), 2U high |
| Width |
482 mm (19") |
| Depth |
200 mm (7 7/8") |
|
|
| Weight |
|
| Net |
4.5 kg |
| Shipping |
5.7 kg | |