큰이미지  후면  실사     영문메뉴얼  제품상세   본사사이트


Klark Teknik 1974년 Phil, Terry Clarke 형제가 Klark Teknik사를 설립하여 앞선 기술개발을 통해 혁신적인 오디오 디자인을 소개한 이래로, 오늘날까지도 아날로그 및 디지털 영역 오디오 프로세싱 분야에 혁신적인 디자인과 엔지니어링을 통해 뛰어난 음질의 제품을 생산하고 있습니다. Klark Teknik사의 DN시리즈 그래픽 이퀄라이저는 아직도 음향시장의 독보적인 존재로 자리하고 있습니다.


DN 530 With the unrelenting absorption of signal processing into digital mixing consoles, outboard gear now has to contribute something extra special merely to justify its space in the rack. The new DN530 Creative Quad Gate does just that. It brings some exciting new tools to the audio party. The DN530 features "Transient Accenting", a creative feature providing an easy way to enhance the attack envelope beyond merely opening the gate. This can provide up to 12dB of additional transient energy and its primary application is to provide additional impact on drums and percussion instruments, although it can be used to enhance the impact of many instruments, including acoustic stringed instruments such as guitar and piano.


* Quad channel gate
* It features a unique progressively controllable accent level that emphasizes the start of a signal to increase the dynamic power within percussive signals
* Gate attack is exponential which means it can be set extremely fast to reduce signal loss at the start of sounds while remaining sonically transparent - no clicks
* Gate release is reverse exponential so it can be set relatively fast and blend in seamlessly with the natural decay of the material
* Designed from an exemplary technical point of view, features extremely low noise and distortion levels
* The gate features an advanced band pass side chain filter to increase trigger source discrimination
* The gate provides rotary controls for all envelope characteristics and range
* External key inputs and ducking facilities are provided
* The status of bypass, solo and other major switches are boldly presented to avoid mistakes
* Road worthy chassis
* Balanced outputs
* Auto switching power supply


Inputs - Four
Type: Analogue, electronically balanced female XLRs (Pin 2 hot)
Impedance: 10kΩ
Maximum input level: +22dBu
Common mode rejection: Typically, -80dB at 1kHz

Outputs - Four
Type: Analogue, electronically balanced male XLRs (Pin 2 hot)
Output impedance: <60Ω
Maximum output level: +22dBu
Signal drive capability: <600Ω

EXT SIDECHAIN inputs - Four
Type: Analogue, electronically balanced Jack sockets
Impedance: 20k
Maximum input level: +22dBu
Common mode rejection: Typically -60dB at 1kHz

SOLO BUS input - One
Type: Analogue, electronically balanced female XLR (pin 2 hot)
Input impedance: 20kΩ
Maximum input level: +22dBu
Common mode rejection: Typically -60dB at 1kHz

SOLO BUS output - One
Type: Analogue, electronically balanced male XLR (pin 2 hot)
Output impedance: <60Ω
Maximum output level: +22dBu
Signal drive capability: <600Ω

Performance
Maximum gate gain reduction: Greater than -90dB
Maximum accent gain: +12dB
Maximum signal level any input or output: +22dBu
Noise at main output with unity gain: -94dBu
Distortion at 1KHz 0dBu with steady unity gain condition: <0.05%
Signal delay: 0 seconds
Frequency response: ±0.5dBu (input to output), 20Hz to 20kHz
Dynamic range: >116dB (22Hz to 22kHz unweighted)

Gate
Threshold: Scale = -50dB to +25dB
Range: Scale = -4 (minus infinity) to 0dB
Attack: Scale = 30µs to 10ms
Release: Scale = 2ms to 2s
Hold: Scale = 2ms to 2s
Accent: Scale = 0dB to +12dB

Filter
Sidechain filter: Scale = 40Hz to 16kHz

Terminations
Audio: 3-pin XLRs (male and female) and 1/4" TRS balanced jack sockets
Power: 3-pin IEC

Power requirements
Voltage: 100VAC to 240VAC ±10%
Frequency: 50Hz to 60Hz
Consumption: <25W

Dimensions
Height: 44.5 mm (1.75"), 1U high
Width: 483 mm (19")
Depth: 305 mm (12")

Weight
Net: 4.6 kg
Shipping: 5.6 kg

Operation
Temperature: +5°C to +40°C

Storage
Temperature: -20°C to +60°C

Due to a policy of continual improvement, KLARK TEKNIK reserves the right to alter the function or specification at any time without notice.